Samsung Oven Error Codes: Complete List & Fixes
Every Samsung oven code that matters — what it means, the 60-second reset to try, and what it costs when the code won’t clear.
✓ Full code list ✓ Reset protocol ✓ Same-day repair
Samsung Oven Error Codes, Decoded
Samsung’s diagnostic system is thorough. Here’s the full list we see in Beaverton homes.
| Code | Meaning | Try First | Typical Repair |
|---|---|---|---|
| SE / 5E | Stuck touch key | Breaker reset 60s | Keypad $150–$350 |
| E-08 | Oven sensor shorted | Reset; check wiring | Sensor $100–$300 |
| E-27 | Oven sensor open | Reset; check wiring | Sensor/harness $100–$350 |
| E-28 | Oven sensor shorted | Reset | Sensor $100–$300 |
| C-d0 | Button fault | Reset; clean panel | Panel $150–$400 |
| C-d1 | Door lock fault | Cool down; reset | Latch $120–$300 |
Brand overview: Samsung oven repair →
Before You Call: The Reset Protocol
Half of all error codes clear with a proper power cycle. Do it right, once.
Universal Reset Protocol (Try First)
- Note the code. Photograph the display — codes can clear on reset and we’ll want to know which one appeared.
- Breaker off, 60 seconds. Flip the oven’s breaker fully OFF, wait a full minute, flip back ON. This clears transient faults.
- Reset the clock. Many ovens won’t heat until the clock is set after a power cycle.
- Test one function. Try Bake at 350°F. If the code returns immediately, it’s a hard fault — stop resetting and call us.
- Don’t repeat endlessly. Three failed resets = real failure. Repeated power-cycling won’t fix a bad sensor or board.
Samsung Error Code FAQs
Quick answers for Samsung owners staring at a code.
My Samsung oven shows SE and beeps constantly. What do I do?
SE means a stuck touch key. Power-cycle at the breaker for 60 seconds. If SE returns, the membrane keypad has failed — $150–$350. Don’t keep pressing keys; it won’t unstick itself.
What’s the difference between E-27 and E-28?
Both are oven sensor faults: E-27 = open circuit (broken wire or dead sensor), E-28 = shorted circuit. Same part, same $100–$300 fix — we meter-test to confirm which.
Will unplugging my Samsung oven clear the error code?
It clears transient codes, yes — that’s the breaker-reset protocol above. But a code that returns immediately is a hard fault (bad sensor, keypad, or board) and needs the part replaced.
My Samsung shows a code not on this list. Now what?
Photograph it and call us at (971) 399-8141 — newer models add codes yearly. The flat-rate diagnostic covers full code readout and meter verification.
How much does Samsung error-code repair cost?
Sensor codes: $100–$350. Keypad/panel codes: $150–$400. Latch codes: $120–$300. Flat-rate quote before work, flat-rate diagnostic credited in full.
Code You Can’t Clear? We’ll Decode It In Person.
Same-day diagnosis in Beaverton — flat-rate pricing, quoted and approved before any work begins.